To change the time, Step 3: presetting radio stations, Presetting radio stations – Sony MHC-RXD9 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3
Press ENTER/NEXT.
The minute indication flashes.
step 2: Setting the time
(coninued)
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
Tip
If you've made a mistake, start over from step 1.
To change the time
The previous explanation shows you how to ,
set the time while the power is off. To changé
the time while the power is on, do the
following:
1
Press CLOCK/TIMER SET.
2 Turn the jog dial to select SET CLOCK.
3 Press ENTER/NEXT.
4
Perform steps 2 through 5 above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Step 3: Presetting
radio stations
You can preset the following number of
stations:
- 2 band model: 20 for FM, 10 for AM.
- 3 band model: 20 for FM, 10 for MW, and
10 for SW, or 20 for FM, 10 for AM and 5
for UKV, depending on the model you
purchased.
Jt
^
(Power)
Jog dial ^
I
8