Sony DSC-F1 - Manual (Page 45)

4
Select the destination drive and folder in which the
images are to be saved and file type.
To select the drive: Click the desired drive in the
[Drive] list box.
To select the folder: Double-click the desired
folder in the [Folder] list box so that the
folder is displayed as currently selected
folder above the list box.
To select the file type: Click the file type in the
[Save as type] drop-down list box.
Making a new folder
In the [Folder] list box, folders contained in the
currently selected folder are listed. To add a new
folder to the list, click [Create New Folder]. In the
[Set Folder Name] dialog box, input the new folder
name and click [OK].
Saving the camera images as another file format
46
Stopping saving midway
Press the [Esc] key. (You
cannot stop saving in the
infrared data
communication.)
Note
If you select TIFF, the file
is created in Class R.
Capturing an image
5
Click [OK].
Each image is stored in the specified folder in the
specified file type with a file name "psn***»*"
serial number). The file is automatically
numbered in serial starting from one larger
number than the largest number of the files
already stored in the currently selected folder.
Saving in JPEG file type
When you select [JPEG] file type and click [OK],
the dialog box to define the image quality
(compression ratio) appears. You can select the
image quality within the range from f to 100.
Usually, the larger numberyou select, the lower
compression ratio with the better image quality
you get. The file size, however, becomes larger.
Click [OK] to save the image.