To prevent fire or shock hazard, Do not expose the unit to rain or moisture, Before you begin – Sony ICF-C113VSILVE User Manual

Page 2: Features, Precautions, Specifications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

To prevent fire or shock

hazard,
do not expose the unit

to rain or moisture.

CAUTION TONBMCCTKIWKOrELECTWCSHOC«.

DO HOT WMOW COVER (Oe «ACIQ

NO UKR-MRVVXMU PMITB MHOC.

RERCR MRVICMQ TO QIMJFIEO MRVKC RCRSONNE«.

A

■ A

This symbol is intended to alert tiie

user to the presence of uninsulated
"dangerous voltage" within the

product's enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.

This symbol is intended to alert dte
user to the presence of important
operating and maintenance (servicing)
instructions in the literature

accompanying the appliance.

» The graphical symbols are at the bottom of the

unit.

You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to op>erate
this equipment.

INFORMATION

This equipment has been tested and found to
comply widt the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable

protection agamst harmful interference in a
residential installation. This equipment
generates, uses, and can radiate radio frequency

energy and, if not installed and used in
accordance with the instructions, may cause
harmful interference to radio communicatioiis.
However, there is no guarantee that interference
will not occur in a particular installation. If this

equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following

measures;

—Reorient or relocate the receiving

antenna.

—Increase the separation between the

equipment and receiver.

—Connect die equipment into an outlet

on a circuit different from dut to
which the receiver is connected.

—Consult the dealer or an experienced

radio/TV technician for help.

Before You Begin

Thank you for choosing the Sony Dream
Machine. The Dream Machine will give you
many hours of reliable service and listening
pleasure.
Before operating the Dream Machine, please read
these instructions thoroughly and retain them for
future referCTK«.

Features

• Date button to display the year, month and

date.

• D.S.T. (Daylight Saving Time)—Summer time

calculation (one-hour skip funcHon).

• Dual alarm FM/AM PLL (phase locked loop)

synthesized clock radio.

• 5 random memory presets.
• Radio and buzzer alarms with the snooze

function.

• LCD with backlight which has a brightness

switch.

• LED indicators for Dual Alarm.
• Self power back-up; Even if the power supply

is interrupted, the time setting and the memory
will be backed up for half an hour without

batteries.

Precautions

• Operate the unit only on 120 V AC, 60 Hz.
• Disconnect the cord by grasping the plug.

Never pull it by the cord.

• Do not leave the unit in a location near a heat

source 8U<di as a radiator or airduct, or in a
place sidtject to direct sunli^t, excessive dust,
mechanical vibration, or shock.

« Do not place the unit on surfaces (rugs,

blankets, etc.) or near materials (curtains,
draperies) dial block the ventilaticxi holes.

• Siould any liquid or solid object fall into the

unit, unplug the unit and have it checked by
qualified personnel b^ore operating it further.

• When the casing becomes soiled, clean it witfi a

soft cloth dampened with a mild detergent
solution. Never use abrasive cleaners or

chemical solvents, as they may mar the casing.

If you have any questions, please consult your
nearest Sony dealer.

Specifications

Time display

12-hour system

Frequency range

FM; 875-108 MHz
AM: 530-1710 kHz
TV: 2-13ch
WEATHER: l-5ch

Channel steps

FM; 0.1 (fixed)
AM; 10 kHz (fixed)

Speaker

Approx. 6.6 cm (2 5/8 in) dia.

Power output

130 mW (at 10% harmonic distortion)

Power requirements

•120 V AC, 60 Hz

Dimensions

Approx. 119 X 118 X 129.5 mm (w/h/d)
(4 5/4 X 4 3/4 X 5 1 /8 in) incl. pr<^ecting parts

and controls

Mass

Approx. 630 g (11b 6.2 oz)

Design and specifications are subject to change
without notice.

Advertising
This manual is related to the following products: