Sony STR-DB930 User Manual
Fm stereo fm-am receiver
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- FM Stereo FM-AM Receiver
- Precautions
- Unpacking
- Antenna Hookups
- Terminals for connecting the antennas
- Assembling the supplied FM antenna
- Notes on antenna hookups
- Jddcs for connecting audio components
- Notq on audio component hookups
- Jacks for connecting audio components
- Note on audio component hookups
- Jacks for connecting video components
- Note on video component hookups
- Required cords
- Example of LD player connected via an RF demodulator
- Digital Component Hookups
- Required cords
- 5.1CH input Hookups
- other Hookups
- Speaker System Hookup
- Performing Initial Setup Operations
- Before turning on the receiver
- Clearing the receiver's memory
- Performing initial setup operations
- Specifying the speaker parameters
- 1 Press l/Cl) to turn on the receiver.
- 2 Press SET UP.
- 3 Press the cursor buttons (-^ or to select the parameter you want to adjust.
- 4 Turn the jog dial to select setting you desire. The setting is entered automatically.
- 5 Repeat steps 3 and 4 until you have set ail of the parameters that follow.
- 9 About speaker distances
- Adjusting the speaker volume
- Before You Use Your Receiver
- Before turning on the receiver
- Checking the connections
- 1 Press l/Ci) to turn on the receiver.
- 2 Turn FUNCTION to select a component (program source) that you connected (e.g., CD player or tape deck).
- 3 Turn on the component and start playing it.
- 4 Rotate MASTER VOLUME to turn up the volume.
- There is no sound no matter which component is selected.
- There's no sound from a specific component.
- No sound is heard from one of the front speakers.
- Location of Parts and Basic Operations
- Enjoying
- Surround
- Sound
- A.F.D.
- Q.
- Selecting a Sound Field
- 1 Press MODE.
- 2 Turn the jog dial or press the cursor buttons « or »to select the sound field you want.
- SOUND FIELD buttons:
- To turn the sound field off
- ? The receiver memorizes the last sound field selected for each program source (Sound Field Link)
- 9 You can identify the encoding format of program software by looking at its packaging
- Note
- Ù.
- Understanding the Multi-Channel Surround Displays
- Customizing Sound Fields
- To get the most from multi channel surround sound
- Adjusting the surround parameters
- Adjusting the level parameters
- 1 Start playing a program source encoded with multi channel surround sound.
- 2 Press LEVEL
- 3 Press the cursor buttons (< or »to select the parameter you want to adjust.
- 4 Turn the jog dial to select setting you desire. The setting is entered automatically.
- Front balance (FRONT)
- Rear balance (REAR)
- Rear level (REAR)
- Center level (CENTER)
- Sub woofer level (SUB WOOFER)
- LFE (Low Frequency Effect) mix level (LFE MIX)
- Dynamic range compressor (D. RANGE COMP)
- Adjusting the equalizer
- Start playing a program source encoded with multi channei surround sound.
- Press EQ.
- Press the cursor buttons (•< or >) to select the parameter you want to adjust.
- Turn the jog dial to select setting you desire. The setting is entered automatically.
- You can turn off the equalization without erasing it
- Level (dB)
- Frequency (Hz)
- 1 If the power is on, press l/Cl) to turn off the power.
- 2 Hold down MODE and press \/(b.
- Adjustable parameters for each sound field
- Adjustable parameters for each sound field (continued)
- Receiving
- Broadcasts
- This chapter describes how to receive FM or AM broadcasts and how to preset selected stations.
- Direct Tuning
- Brief descriptions of buttons used to receive broadcasts
- Note
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press D. TUNING.
- 4 Press the numeric buttons to enter the frequency.
- If you cannot tune in a station and the entered numbers flash
- 6 Repeat Steps 2 to 5 to receive another station.
- ff If you try to enter a frequency that is too precise for the tuning scale
- 1 Rotate FUNCTION to select the tuner.
- 2 Press FM/AM to select the FM or AM band.
- 3 Press TUNING + or TUNING
- Presetting radio stations
- 1 Rotate FUNCTION to select the tuner.
- When the receiver reaches either end of the band
- 4 To continue scanning, press TUNING + or TUNING - again.
- Press MEMORY.
- Press SHIFT to select a memory page (A, B or C).
- Select a preset number by pressing PRESET TUNING + or PRESET TUNING
- 6 Press MEMORY again to store the station.
- 7 Repeat Steps 2 to 6 to preset another station.
- To change a preset number to another station
- Tuning to preset stations
- Brief descriptions of buttons used to receive broadcasts
- other
- Operations
- Brief descriptions of buttons that appear in this chapter
- Maming Preset Stations and ^’rogram Sources
- Recording
- Using the Sleep Timer
- Recording on a video tape
- 1 Select the program source to be recorded.
- 2 Prepare the component for playing.
- 3 Insert a blank video tape into the VCR (VIDEO 1 or VIDEO 2) for recording.
- 4 Start recording on the recording VCR, then start playing the video tape or laser disc you want to record.
- Press SLEEP while the power is on.
- Recording on a video tape
- Adjustments Using the SET UP Button
- Setting up the 2 way remote (STR-DB930 only)
- Troubleshooting
- There's no sound or only a very tow-level sound is heard.
- The left and right sounds are unbalanced or reversed.
- Severe hum or noise is heard.
- Intermittent sound from a digital source.
- Troubleshooting
- No sound is heard from the center speaker.
- No sound or only a very low-level sound is heard
- from the rear speakers.
- The surround effect cannot be obtained.
- Recording cannot be done.
- Radio stations cannot be tuned in.
- No picture or an unclear picture appears on the TV screen or monitor.
- The video image on the TV screen or monitor does not correspond to the selected component.
- The remote does not function.
- Specifications
- Glossary