Sony STR-DB930 - Manual (Page 18)

Performing Initial Setup Operations
Once you have hooked up the speakers and turned on the
power, clear the receiver's memory. Then specity the
speaker parameters (size, position, etc.) and pert'orm anv
other initial setup operations necessary tor your system.
Before turning on the receiver
Make sure that you have:
• Turned MASTER VOLUME to the lettmost position (0).
• Selected the appropriate front speakers (see "[8l
SPEAKERS selector" on page 28).
Clearing the receiver's memory
Before using your receiver for the first time, or when you
want to clear the receiver's memory, do the following.
This procedure is not necessary if the demonstration
activates when you turn the power on.
I/Cl)
Performing initial setup operations
Before using your receiver for the first time, use the SET
UP button to adjust the setup parameters so that they
correspond to your system. You can adjust the following
items. For details on how to make adjustments, see the
page in parenthesis.
• Speaker size and placement (pages 19~21).
• Speaker distance (page 21).
• Whether other components will turn on/off
automatically via the CONTROL A1 II control system
(page 50).
• STR-DB930 only: 2 way remote control system
operation (page 50).
1
Turn off the receiver.
2
Hold down l/(!) for S seconds.
The currently selected function, then the
demonstration message appears in the display. All of
the following items are reset or cleared:
• All preset stations are reset or cleared.
• All sound field parameters are reset to their factory
settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program source
and preset stations are cleared.
1 8