Labeling recordings (title function), To erase a character, To cancel labeling – Sony MDS-JA3ES User Manual
Page 26: Note, Editing recorded mds
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Editing Recorded MDs
Labeling Recordings (Title
Function)
You can create titles for your recorded MDs and tracks.
Titles — which may consist of uppercase and
lowercase letters, numbers and symbols for a
maximum of about 1,700 characters per disc — appear
in the display during MD operation.
Use the following procedure to label a track or an MD.
You can label a track while it is playing, pausing or
recording. If the track is playing, be sure to finish
labeling before the track ends. If the track ends
before you've completed the labeling procedure,
the characters already entered are not recorded and
the track will remain unlabeied.
1
Press EDIT/NO repeatedly until "Name in ?"
appears in the display, then do the following:
To label
Make sure that the deck is
A track
Playing, pausing, recording the track
to be labeled, or stopf>ed after
locating the track to be labeled
An MD
Stopped with no track number
appearing in the display
2
Press YES.
A flashing cursor appears in the display.
^1'
4 5
6 7 9 9 10
11 12 13 14 IS
16 17 18
3
Turn AMS to select the first character.
9 7 8 9 10
11 12 13 14 1$
16 17 18
The selected character flashes.
Letters, numbers, and symbols appear in sequential
order as you turn AMS.
You can use the following symbols in titles:
Press AMS to enter the selected character.
The cursor shifts rightward and waits for the input
of the next character.
«.''V
9 7 8 9 ID
11 12 13 14 IS
16 17 18
5
Repeat Steps 3 and 4 until you have entered the
entire title.
If you entered the wrong character
Press ◄◄ or ►► until the character to be corrected starts
flashing, and repeat Steps 3 and 4 to enter the correct
character.
To erase a character
Press or ►► until the character to be erased starts
flashing, then press EDIT/NO.
To enter a space
Press AMS or ►► while the cursor is flashing.
6
Press YES.
This completes the labeling procedure and the title
appears on the left side of the display.
To cancel labeling
Press ■.
Note
You cannot label a track or an MD while you are recording
over an existing track.
28