Playing an md, Q' to use headphones – Sony MDS-JA3ES User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operations
Playing an MD
2
4
3
See pages 7 and 8 for hookup
information.
You can locate and play back
a track while the deck is
stopped
1
Turn AMS (or press or
►W) until the number of
the track you want to play
appears.
2 Press AMS or ►.
'Q' To use headphones
Connect them to PHONES
jack. Use PHONE LEVEL to
adjust the volume.
1
Turn on the amplifier and set the source selector to the position for
MD deck.
Press POWER.
The ON/STANDBY indicator changes from red to green.
Insert an MD.
J t
Press ►.
The deck starts playing. Adjust the volume on the amplifier.
To
Do the following:
Stop playing
Press ■.
Pause playing
Press II. Press the button again or press
► to resume playing.
Go to the next track
Turn AMS clockwise (or press on
the remote).
Go to the preceding track
Turn AMS counterclockwise (or press
on the remote).
Take out the MD
Press = EJECT after stopping playing.