Q3 hook for shoulder strap (below), On lanc c control jack, Q1 ® (earphone) jack (ccd-tr42/tr70/tr82) – Sony CCD-TR82 User Manual
Page 46: 03 lithium battery compartment (p.30), 01 cassette compartment lid (p.*)), 01 mic (microphone) jack 01 video jack (p.16), 01 rfu dc out (rfu adaptor dc out) jack, 01 audio jack (p.16), Jack cover h grip strap (p.14), Tripod receptacle (p.i4)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Q3
Hook for shoulder strap
(below)
on LANC C control jack
Connect the LANC connecting cable to a
wired remote control unit such as an editing
controller. In this case, set the COMMANDER
mode to OFF in the menu system (p.25).
C stands for Local Application Control Bus
sy tern. The C control jack is used for
controlling the tape transport of video
equipment and peripherals connected to it.
This jack has the same function as the
connectors indicated as CONTROL L or
REMOTE.
Q1 ® (earphone) Jack (CCD-TR42/TR70/TR82)
(p.15)
V )
(headphones) jack (CCO-TR72/TR80) (p.I5)
Ql
Hook for shoulder strap
(below)
03 Lithium battery compartment
(p.30)
01 Cassette compartment lid (p.*))
01
MIC (microphone) jack
01
VIDEO jack (p.16)
01
RFU DC OUT (RFU adaptor DC out) jack
(p.l6)
01
AUDIO jack (p.16)
@ Jack cover
H Grip strap
(p.14)
@ Tripod receptacle
(p.I4)
Attach a tripod (not supplied) here.
When attaching a non-Sony tripod, make sure
that the length of the camera mounting screw
is shorter than 9/32 inches (6.5 mm).
Otherw'ise, the screw might damage the inner
part of the camcorder.
Attaching the shoulder strap
Attach the supplied shoulder strap to the hooks for the shoulder strap
(
01
,
01
)-