Charging and installing the battery pack, Charging the battery pack, Charging time – Sony CCD-TR82 User Manual
Page 6: Battery life, I uenmg »lanea
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
I uenmg »lanea
Charging and Installing the Battery Pack
Before using your camcorder, you first need to charge and install the battery pack. To charge the battery-
pack, use the supplied AC-V25/V25A/V25B AC power adaptor.
Charging the Battery Pack
Charge the battery pack on a flat place without vibration.
(1)
Connect the AC power adaptor to a wall outlet.
(2)
Align the right side of the battery pack with the
line on the AC power adaptor, then slide the battery pack in the direction of the arrow. (3) Set the
selector to CHARGE. The POWER lamp (green) and the CHARGE lamp (orange) light up. Charging
begins.
When charging is completed, the CHARGE lamp goes out. Set the selector to the center position and
unplug the unit from the wall outlet. Then remove the battery pack and install it on the camcorder. To
stop civirging, set the selector to the center position.
Charging Time
Battery pack
NP-55
(supplied)
NP-80
NP-80D
NP-77H
NP-66H
NP-60D
NP-55H
Charging time*
70
180
160
120
90
80
» Approximate minutes to charge an empty pack using the AC-V25/V25A/V25B (Lower temperatures
require a longer charging time.)
Battery Life
CCD-TR42/TR72
Battery Pack
NP-55
NP-80/
80D
NP-77H
NP-66H
NP-60D
NP-55H
Typical recording time**
35
95
85
65
45
40
Continuous recording time***
65
180
160
120
85
75
CCD-TR70/TR80
Battery pack
NP-55
NP-80/
80D
NP-77H
NP-66H
NP-60D
NP-55H
Typical recording time**
30
90
80
60
40
35
Continuous recording time***
60
170
150
no
80
70