Audio system, Preparing for use, Notes – Sony KV-27TS29 User Manual
Page 26: Connecting other equipment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting Other Equipment
Audio System
Listening to TV or connected VCR sound through an audio system
Preparing for use
Display the mode set menu and set SPEAKER to OFF to
cut off the TV speaker sound (p. 37), and listen to the TV’s
sound solely through the audio system speakers.
By setting AUDIO OUT variable, you can adjust the bass, treble
and balance, or select surround or an MTS (Multichannel TV
Sound) mode, using the on-screen menus (pp. 34-36).
Connecting active super woofer (supplied with KV-32TS46 only)
Preparing for use
To enjoy the active super woofer sound, make sure the
connections are made as illustrated on the next page.
The woofer volume varies according to the TV volume.
Adjust the woofer level control properly.
The active super woofer outputs the signal input to its
AUDIO IN jacks. If you connect an audio system to the
active super woofer’s AUDIO OUT jacks, you can enjoy the
sound from the audio system and the active super woofer
simultaneously.
To make the active super woofer stable, attach the felt feet
(supplied) to the bottom.
Notes
• Do not place the woofer on the TV set. To enjoy good sound,
place the woofer on a hard object near the TV avoiding soft
objects like carpets, sofas, etc.
• If you do not use the TV for more than 20 seconds, the active
super woofer is turned off automatically to save on power
consumption.
• When you release MUTING, the sound of the woofer is heard
before that of the TV. This is normal.
• If you set SPEAKER to OFF in the AUDIO menu and select FIX
in the AUDIO OUT menu (p.37), the volume of the woofer may
be excessive. We recommend that you set SPEAKER to ON
when you use the active super woofer.
• You should only connect the KV-32TS46 to the AC outlet on the
active super woofer.
Active Super Woofer Specification
Input:
500 mVrms (100% modulation)
Output:
500 mVrms (100% modulation)
Impedance: 20 kilohms
Speaker output: 9 W (100 Hz)
Dimensions: 435
x
165
x
164 mm (W
x
H
x
D)
(1774
X
6
V
2
X
6
V
2
in.)
Mass:
3.9 kg
(8 lbs 10 oz)
26
Chapter 1: Setting Up