Cr connections, Connecting an antenna/cable tv, System with a vcr – Sony KV 32S40 User Manual
Page 9: Connecting a vcr and tv with a :able box, Vcr connections
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
\/CR Connections
Connecting an antenna/cable TV
system with a VCR
1
Attach the coaxial connector from vour cable
or antenna to IN on your VCR.
2
Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.*
3
Using a coaxial connector, connect OUT on
your VCR to VHF/UHF on vour TV.
It vou are connecting a monaural VCR, connect onh’ the
single white audio output to the left input on vour TV.
Disconnect all power sources before making any connections.
VMC-810S/820S (not supplied)
Connecting a VCR and TV with a
:able box
I'ou will need a splitter (not supplied) for the
ollowing connection.
I Connect the single (input) jack of the splitter
to your incoming cable connection. Connect
the other two (output) jacks (using coaxial
cable) to IN on your cable box and VHF/UHF
on your TV.
I Using a coaxial connector, connect OUT on
your cable box to IN on your VCR.
5 Using A/V connectors, connect AUDIO and
VIDEO OUT on your VCR to AUDIO and
VIDEO IN on your TV.
For optimum picture quality, use S VIDEO Instead of
the yellow A/V cable. S Video does not provide sound,
your audio connectors must still be connected.
. Cable
,
1
Coaxial cable
VCR
iWOK) B AUDIO L VOEO S VIDEO
Splitter
(not supplied)
(Rear of TV)
f| fl AUDIO-R (red)
AUDIO-L (white)
' VIDEO (yellow)
------------
1
---
VMC-810S/820S (not supplied)
Cable box