Sony CDP-211 - Manual (Page 14)

2-A
1
PROGRAM
2 a
2 b - i )
Md-« PM>M
a
B-2)
PROGRAM
Playing in a
Desired Order
Recording a Program
You can adjust the total playing time of the
program, so that you can make the program
fit the length of a tape when recording.
Moreover, you can make two different
programs by inserting a pause for recording
on both side of a tape.
1
Press PROGRAM.
PROGRAM appears in the display.
2 a
2-B
1)
Press the numeric buttons of the
desired selections in the desired
order. See page 13.
To find selections which fit In the
remaining time.
2 )
Press «(M4) or I
(^M) to change a selection and
check the time. - Program edit
If satisfactory, go to the next step. If
not. choose another selection.
Press PROGRAM to store the
selection.
Step number appears in the display
for a while.
Repeat steps 1) and 2) to program
other selections.
The display shows:
a) The last programmed selection
b) The order to be playe
c) Programmed selection
numbers
d) The total playing time
3
Press
n
to make a program for side
B.
'B* in the tape indicator flashes and *P*
appears in the display, and the total
playing time is reset to 0. A pause is
also counted as a selection.
4
Program selections for side B by
repeating step 2.
5
Start recording on the cassette deck
and press
It is better to start recording on the
cassette deck first to transport the
leader tape before pressing
> ■ on this
unit.
o tm S£C
n n n
u.uu
©a
2 5
8 10
To play the selections for side B
When the selections for side A are played,
the unit enters pause mode. Reverse the
tape, then press or II.
To make a program only for one
side of a tape
Follow the steps on page 13.
14