Specifications – Sony CDP-211 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Specifications
Compact disc player
Laser
Waveletrgth
Frequency response
Signal-to-noise ratio
Dynamic range
Harmonic distortion
Channel separation
Outputs
LINE OUT (phono jacks)
PHONES (stereo phone jack)
Semiconductor laser
780 - 790 nm
2 Hz to 20 kHz ±0.5 dB
More than 100 dB
More than 98 dB
Less than 0.0045%
More than 95 dB
Output level 2 V (at 50 kilohms)
Load impedance over 10 kilohms
Output level max. 10 mW
Load impedance 32 ohms
General
Power requirements
120 V AC, 60 Hz
Power consumption
10 W
Dimensions (approx., including projections)
430 X 100 x 295 mm (w/h/d)
(17x4 X11
Vs
inches)
Mass (approx.)
3.2 kg (7 lbs 1 oz)
Remote commander (only for CDP-311)
Remote control system
Infrared control
Power requirements
3 V DC with two size AA(R6)
batteries
Dimensions (approx., including projections)
40x20x175 mm (w/h/d)
(1 Vs
X
'Vis
X
7 inches)
Mass (approx.)
95 g (4 oz)
Supplied accessories
Audio cord
(1) (2 phono plugs - 2 phono plugs)
Remote commander (only for CDP-311)
(
1
)
Sony SUM-3 (NS) batteries (only for CDP-311)
(
2
)
Design and specifications are subject to change without notice.
22