General information, Cleaning – LG SXS LRSC 26980TT User Manual

Page 27

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

General Information

Vacation Time

During average length vacations, you will probably find it best to leave the refrigerator

in operation. Place freezable items in freezer for longer life.

When you plan to store the refrigerator, remove all food, disconnect the power cord,
clean the interior thoroughly, and block the doors open to prevent mold and mildew.

Be certain the stored refrigerator does not present a child entrapment danger.

Power Failure

Most power failures that are corrected in an hour or two will not affect your

refrigerator temperatures.

However, you should minimize the number of door openings while the power is off.

If You Move

Remove or securely fasten down all loose items inside the refrigerator.

To avoid damaging the height adjusting screws, turn them all the way into the base.

Anti­

Condensation

Pipe

The outside wall of the refrigerator cabinet may sometimes get warm, especiallyjust
after installation.

Don't be alarmed. This is due to the anti-condensation pipe, which pumps hot

refrigerant to prevent

sweating

on the outer cabinet wall.

Cleaning

It is important that your refrigerator be kept clean to prevent undesirable odors. Spilled

food should be wiped up immediately, since it may acidify and stain plastic surfaces if
allowed to settle.

Exterior

Use a lukewarm solution of mild soap or detergent to clean the durable finish of your

refrigerator. Wipe with a clean damp cloth and then dry.

Interior

Regular cleaning is recommended. Wash all compartments with a baking soda

solution or a mild detergent and warm water. Rinse and dry.

After Cleaning

Please verify that the power cord is not damaged, power plug is not overheated, and

the power plug is well inserted into the power outlet.

Warning

Always remove the power cord from the wall outlet prior to cleaning in the vicinity of

electrical parts (lamps, switches, controls, etc.).

Wipe up excess moisture with a sponge or cloth to prevent water or liguid from

getting into any electrical part and causing an electric shock.

Never use metallic scouring pads, brushes, coarse abrasive cleaners, strong alkaline

solutions, flammable or toxic cleaning liquids on any surface.

Do not touch frozen surfaces with wet or damp hands, because damp object will stick

or adhere to extremely cold surfaces.

-

Advertising