Warning – Craftsman 152.213371 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
UNPACKING AND CHECKING
CONTENTS (Figure 4 and Figure 5)
This Dust Collector will require a minimal amount of
assembly.
Remove all of the parts from the shipping box and lay
them on a clean work surface. Compare the items to
Figure 4 and Figure 5, verify that all items are account
ed for before discarding the shipping box.
A
warning
If any parts are missing, do not attempt to plug in the
power cord and turn "ON" the Dust Collector. The Dust
Collector can only be turned "ON" after all the parts
have been obtained and installed correctly.
A. Blower and motor Assembly
E.
Base
B.
4-inch Hose Clamp
F.
Intake Port Caps (2)
C .
4-inch Diameter Flexible Hose
G.
D rum
D. Intake Port