Craftsman 315.111640 - Manual (Page 11)

BATTERY REMOVAL
To preserve natural resources, please
recycle or dispose of proprerly.
This product contains nickel-cadmium
batteries. Local, state or federal laws
may prohibit disposal of nickel­
cadmium batteries in ordinary trash.
Consult your local waste authority for
information regarding available
recycling and/or disposal options.
BATTERY REMOVAL, PREPARATION FOR
RECYCLING
See Figure 8.
TO REMOVE:
■ Lock switch trigger by placing the forward/reverse
switch in center position. See Figure 4.
R Remove cover securing batteries by depressing
and pushing cover in the direction of the arrow as
shown in figure 8.
■ Slide batteries from motor housing enough to
expose leads and battery terminals. Disconnect
leads from battery terminals.
Note: Be careful not to break battery terminals
when disconnecting leads.
A WARNING: Upon removal, cover the battery's
terminals with heavy duty adhesive tape. Do not
attempt to destroy or disassemble battery or
remove any of its components. Nickel-cadmium
batteries must be recycled or disposed of
properly. Also, never touch both terminals with
metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these warnings could result in fire
and/or serious injury.
BATTERY
TERMINALS
COVER
Fig. 8
REPLACEMENT PARTS
WHEN SERVICING, USE ONLY IDENTICAL CRAFTSMAN REPLACEMENT PARTS
Key Part
No. Number Description
1
*
Battery Charger
(Item No.
a-11081)
2 974048-001 Battery Pack
972000-597 Owner's Manual
* Can Be Purchased Thru RSOS (Retail Special Order System)
11