Craftsman 486.24608 - Manual (Page 3)

INSTRUCTIONS FOR SINGLE SUSPENSION BRACKET TRACTORS
STEP 1 : (SEE FIGURE 2)
• Open parts bag labelled "A" and verify that all parts
are present.
NOTE: Place cardboard or a mat on work surface to prevent
scratching of parts removed from carton and tractor.
HARDWARE SHOWN FULL SIZE
EXCEPT WHERE NOTED
mu
(not full size)
PARTS BAG "A"
FIGURE 2
Ref. Part Qty. Description
A 43350 4 Carriage Bolt, 3/8-16x1"
B 44072 4 Whiziock Nut, 3/8"
C R19171616 4 Washer, 1/2" x 1"
D 47674 4 Plug
66460 1 Bumper
STEP 2: (SEE FIGURE 3)
• Remove tractor hood. (Refer to tractor manual.)
• Remove the browning shield as shown.
STEP 3: (SEE FIGURE 4)
• Place plug on a work bench or solid table and push
end of bumper down onto plug. Repeat for remaining
plugs.
STEP 4: (SEE FIGURE 5)
• Place a washer onto a carriage bolt and then Insert
the bolt Into the second mounting hole from the front
of the tractor frame. Securely tighten a whiziock nut
onto the bolt on the outside of the tractor frame.
Repeat on other side of tractor.
Call 1 -866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE