Step 6: (see figure 7) – Craftsman 486.24608 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STEP
5: (SEE FIGURE 6)
•
Spread ends of bumper enough to fit slots onto bolts
in rear mounting holes in tractor frame.
•
The bumper has three mounting holes. The rear
holes provide the most clearance while the forward
holes provide a neater appearance. Use a hole that
provides enough clearance for the hood to stay in
raised position when opened. Place a washer onto
a carriage bolt and insert the bolt through the tractor
frame and into desired mounting hole on each side of
bumper. Secure with a whiziock nut.
IMPORTANT: Before fully tightening nuts, be sure
tractor hood will stay in raised position when opened.
STEP
6: (SEE FIGURE 7)
• Replace the browning shield using the front screws
you removed in Step 2.
Call 1 -866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE