Craftsman 107.277700 - Manual (Page 17)

MAINTENANCE
MAINTENANCE SCHEDULE
The following schedule should be followed for normal care of your rider and mower. You will need to keep a record of
your operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by
the hour meter.
RIDER MAINTENANCE
ITEMS Before
Each Use
Every Spring
&Falf
8
Hours
25
Hours
100
Hours 200
Hours
Clean Debris from Rider and Engine
Compartment * #
Clean Debris from Engine Cooling Areas
& Air Filter * •
Check Tire Pressure e
Lubricate Rider & Mower * •
Clean Deck & Check/Replace Mower
Blades •
Clean Battery & Cables •
Check Rider Safety System ** • •
Check / Adjust PTC Clutch e
ENGINE MAINTENANCE ITEMS
Check Engine Oil Level
m •
Service Air Filter Pre-Cleaner *
•
Replace Air Filter * •
Change Engine Oil *
Replace Spark Plug •
Replace Fuel Filter •
Change Engine Oil & Filter *
•
* More often in hot (over 85“ F: 30“ C) weather or dusty operating conditions.
** Check the function of the safety system after the unit has been stored for 30 days or longer.
17