Operation, Know your chipper-shredder, Meets ansi safety standards – Craftsman 247.795940 User Manual
Page 6: Operating controls
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
KNOW YOUR CHIPPER-SHREDDER
READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR CHIPPER-SHREDDER.
Compare the illustrations with your chipper-shredder to famiiiarize yourself with the location of various controls
and adjustments. Save this manual for future reference.
Hopper
Assembly
Chipper
Chute
Starter
Handle
Oil Fill-
Dipstick
Choke
Lever
Throttle
Control
Catcher
Bag
FIGURE 4.
FIGURE 3.
MEETS ANSI SAFETY STANDARDS
Sears chipper-shredders conform to the safety standards of the American National Standards Institute.
OPERATING CONTROLS
(See figures 3 and 4)
CHOKE LEVER—Used to enrich the fuel mixture in
the carburetor when starting a cold engine.
STARTER HANDLE—Used to manually start the
engine.
THROTTLE CONTROL—Controls engine speed and
stops the engine.
RELEASE HANDLE—Used to release the hopper
when lowering to the ground.
BEFORE USING YOUR CHIPPER-SHREDDER, AGAIN REFER TO THE “SAFETY RULES”
PAGE 2 OF THIS MANUAL. ALWAYS BE CAREFUL.
AS SHOWN ON
The operation of any chipper-shredder can result in foreign objects being thrown into
the eyes, which can result in severe eye damage. Always wear the safety glasses pro
vided with the chipper-shredder or eye shields before chipping or shredding, or while
performing any adjustments or repairs. We recommend Wide Vision Safety Mask for
over spectacles or standard glasses available at Sears Retail or Catalog Stores.