Craftsman 358.748260 - Manual (Page 8)

MINIMUM WIRE GAUGE
RECOMMENDATIONS
VOLTS 25 FT. 50 FT. 100 FT.
120 16 16 14
A.W.G.* A.W.GT A.W.G*
*Amerìcan Wire Gauge
Secure the extension cord to the unit by
threading the cord through the cord re­
tainer (see illustration). Insert the cord
receptacle into the recessed plug.
CAUTION: Failure to use cord retain­
er could result in damage to the unit,
extension cord, or both.
USING YOUR UNIT
KNOW YOUR ELECTRIC BLOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
vate the motor.
INLET COVER LATCH
The INLET COVER LATCH Is used to
open and close the inlet cover and to
secure the upper vacuum tube to the
blower unit.
BLOWER TUBE
The BLOWER TUBE is designed to di­
rect the flow of air.
INLET RESTRICTOR
The INLET RESTRICTOR improves the
blower function.
the blower tube or elbow tube to the
blower unit during operation. Also,
pressing the tube release button allows
removal of the blower tube or elbow
tube.
VARIABLE SPEED CONTROL
The
VARIABLE SPEED CONTROL is de­
signed to allow an increase or de­
crease in motor speed as necessary
during blower use only. To avoid caus­
ing damage to the unit,
DO NOT at­
tempt to use the variable speed control
during vacuum use.
8