Assembly, Mounting handle to filtration housing, Assem bly – Craftsman 113.299780 User Manual
Page 10: M ounting h andle to filtration h ousing
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
assembly
MOUNTING FILTER/DUST BAG HOLDER
TO FILTRATION HOUSING
1. Locate the following items from the loose parts bag:
Description
A HexNut* (M6x1)......... ........
...............1
B Lockwas her*
(1/4) ................
.............V.1'.'
C
Fiat Washer*
{MA
x
1/2).........
..................
.1
2. Attach hex nut to threaded portion of
Filter/Dust Bag
Holder
and place lockwasher and flat washer on nut
as shown.
3. Insert
Filter/Dust Bag Holder
into threaded hole of
Filtration Housing
as shwon.
4. Turn
Filter/Dust Bag Holder rod
clockwise until nut is
secured to
Filtration Housing.
5. Secure
Filter/Dust Bag Holder
in piace with adjust
able wrench.
A
B
Items are shown actual size
MOUNTING
HANDLE
TO
FILTRATION
HOUSING
1. Locate the following items from the loose parts bag:
Description
Qty.
A Hex Screws* (M6 x 1 -25)..................4
8
Lockwashers* {1/4"
dia.)...... 4
C Hex Nuts* (M6x 1)............................ 4
2. Attach the ends of the
Handle
to the
Relief Flanges on
the side of
Filtration Housing
as shown.
3 insert hex screw through the
Handle
and
Flange.
4. Attach the lockwasher and the hex nut to the screw
and tighten
5. Repeat process for ali four holes and secure with
adjustable wrench. :
to