Craftsman 358.792443 - Manual (Page 10)

OPERATION
KNOW YOUR BRUSHCUTTER ATTACHMENT
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
BRUSHCUTTER ATTACHMENT.
Compare the illustrations with your unit to familiarize
yourself with the location of various controls and adjustments. Save this manual for
future reference.
Hanger
Blade
BLADE
The BLADE is designed for cutting
grass, weeds, and brush up to 1/2 inch
{1 cm) in diameter,
TRIMMER HEAD
The TRIMMER HEAD holds cutting line
and is designed for cutting grass and
light weeds.
BLADE SHIELD
The BLADE SHIELD provides protection
from the spinning blade.
TRIMMER SHIELD
The TRIMMER SHIELD provides protec­
tion from the spinning trimmer head.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach­
ments to be installed. The optional at­
tachments are:
Edger................................... 71-79240
Cultivator............................. 71-79241
Blower ... ............. .............. 71-79242
Pruner ................................ 71-79245
^WARNING: Always disconnect
powerhead spark plug before remov­
ing or installing attachments.
REMOVING BRUSHCUTTER AT­
TACHMENT (OR OTHER OPTIONAL
ATTACHMENTS)
CAUTION: When removing or instal­
ling attachments, place the powerhead
and attachment on a flat surface for
stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Coupler
Upper Shaft
DOSEN
Attachment
TIGHTEN Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
^ Coupler
Attachment
Upper Shaft
3. While securely holding the upper
shaft, pull the attachment straight
out of the coupler.
10