Craftsman 320.17217 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLE SHOOTING
PROBLEM
CAUSE
SOLUTION
The drill does not start
when trigger switch is
squeezed
Check to be sure power
cord is connected to
power source and that
power source (outlet) is
operable
Connect to power
source.
Confirm power source
(outlet )is operable
Will not drill
Check drill bit and chuck
jaws
Replace drill bit if dull or
worn; tighten chuck jaws
to firmly secure drill bit
Motor overheating
Be sure cooling vents
are free from dust and
obstacles
Clean, clear vents.
Do not cover with hand
during operation
17217 Manual_Revised_09-0708
Page 15
Advertising