Warning – Craftsman 900.370520 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO INSTALL SIDE
DISCHARGE CHUTE
• Shut the mower off, wait until the blade
stops, and unplug power cord.
• Reach down between the mower han
dles, raise the rear door and hold it up
with one hand. Ensure that the mulch
insert has been removed. See page 12,
'To Remove Mulch Insert",
• Grasp the discharge chute with the other
hand and while tilting It downwards Insert
its hook into the mower’s discharge
opening. (See Fig. A)
• Rotate the chute until it is in flat contact
with the deck, and the bottom ribs fit into
the deck grooves. (See Fig. B)
• Lower the rear door until it rests on top
of the discharge chute.
WARNING:
• Do not use the discharge chute if it is
damaged.
• For your own safety, DO NOT use the
mower without either the grasscatcher,
mulch insert, or the discharge chute in
operating position.