Craftsman 315.11910 - Manual (Page 6)

SYMBOLS
1 The following signal words and nneanlngs are Intended to explain ,ne levels of risx assoola.ed wlfh fhls produof.
I
SYMBOL SIGNAL MEANING
A
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
A
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
A
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
SERVICE
Servicing requires extreme care and knowiedge
and shouid be performed oniy by a quaiified service
technician. For service we suggest you return the product
to your nearest SEARS PARTS AND REPAIR SERVICE
CENTER for repair. When servicing, use oniy identicai
repiacement parts.
WARNING: To avoid serious personai injury, do
not attempt to use this product untii you read
thoroughly and understand completely the operator’s
manual. If you do not understand the warnings and
instructions in the operator’s manual, do not use this
product. Call the Craftsman Consumer Helpline at
1 -800-932-3188 for assistance.
WARNING:
The operation of any power tool can result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power tool operation, always wear safety
goggles or safety glasses with side shields and, when needed, a full face shield. We recommend
Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields.
Always use eye protection which is marked to comply with ANSI Z87,1,
SAVE THESE INSTRUCTIONS