Maintenanc, Replacement fuse – Craftsman 315.115930 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MAINTENANC
REPLACEMENT FUSE
See Figure 8.
If the spotlight blows its fuse, you will need to replace it.
Look for replacement fuses where you purchased this
product.
■ Remove the battery pack from the spotlight to access
fuse housing.
■ Remove the current fuse and discard. Use a pair of
fuse pullers if necessary.
■ Use 10 A JAT blade type automotive fuse to replace the
blown fuse.
NOTE: Only use 10 A JAT blade type automotive fuses for
replacement. If second fuse blows, return to authorized
service center for repair. Always ask for replacement fuse
number 019020001013.
CAUTION: Do not use a higher rated fuse other
than the specified amperage. This could cause
damage to the product.
FUSE
4
GOOD FUSE
Fig. 8
BATTERY PACK REMOVAL AND PREPARATION
FOR RECYCLING
À WARNING: Upon removal, cover the battery pack’s
terminals with heavy-duty adhesive tape. Do not
attempt to destroy or disassemble battery pack
or remove any of its components. Lithium-ion and
nickel-cadmium batteries must be recycled or dis
posed of properly. Also, never touch both terminals
with metal objects and/or body parts as short circuit
may result. Keep away from children. Failure to
comply with these warnings could result in fire and/
or serious injury.