Safety instructions cont, Warning, Save these instructions – Craftsman 172.74544 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SAFETY INSTRUCTIONS cont.

A\

WARNING:

: Some dust particles created by lawn and garden tools

contain chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:

• Compounds in fertilizers, herbicides, pesticides, and insecticides.
• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending upon how often you do this
type of work. To reduce your exposure to these chemicals:

• Work in a well-ventilated area
• Work with approved safety equipment, such as those dust masks

that are specially designed to filter out microscopic particles.

A\

WARNING:

NEVER reach under the trimmer (cutting line area) until

trimmer has completely stopped. The trimmer's cutting line will continue to

rotate for a few seconds after it is switched off.

ADDITIONAL RULES FOR SAFE OPERATION

A\

WARNING:

BE SURE to read and understand all instructions. Failure to

follow all instructions listed below may result in electric shock, fire and/or
serious personal injury.

1. ALWAYS wear safety glasses or eye shields when using this tool

Everyday eyeglasses have only impact-resistant lenses; they are NOT safety glasses.

2. PROTECT your lungs. Wear a face mask, dust mask or respirator if the operation is dusty.

3. PROTECT your hearing. Wear appropriate personal hearing protection during use.

Under some conditions noise from this product may contribute to hearing loss.

4. ALL VISITORS AND BYSTANDERS MUST wear the same safety equipment that the

operator of the tool wears.

5. ALWAYS check the tool for damaged parts. Before further use of the tool, a guard

or other part that is damaged should be carefully checked to determine if it will operate
properly and perform its intended function. Check for misalignment or binding of moving
parts, breakage of parts, and any other condition that may affect the tool’s operation.

A guard or other part that is damaged should be properly repaired or replaced

at a Sears Service center.

6.

SAVE THESE INSTRUCTIONS.

Refer to them frequently and use them

to instruct others who may use this tool. If someone borrows this tool, make sure
they have these instructions also.

Advertising