Operation cont, Warning – Craftsman 172.74544 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION cont.
TRIMMING AND EDGING (Figs. 11 and 12)
When trimming, cut from left to right for cutting efficiency; this throws the clippings away
from the operator (See Fig. 11).
To edge, rotate the shaft 180° (See Page 17, Figs. 9, 9a and 10). Place edge guide and
trimmer head above the surface you are going to edge, as shown in Fig. 12.
NOTE: ALWAYS keep the air vents on the trimmer head (motor housing) free
of obstructions when operating the trimmer.
A\
WARNING
:The operation of any trimmer can result in FOREIGN OBJECTS
BEING THROWN, which can result in personal injury or property damage.
ALWAYS use proper safety equipment and keep bystanders safely away.
18