Cisco 3545 MCU - Manual (Page 17)

C H A P T E R
2-11
Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 MCU Releases 5.6 adn 5.7
OL-17013-01
2
Installing the Cisco Unified
Videoconferencing 3545 MCU
• Physical Description, page 2-11
• Verifying the Package Contents, page 2-13
• Mounting the Cisco Unified Videoconferencing 3545 Chassis in a 19-inch Rack, page 2-13
• Installing the MCU and EMP, page 2-15
• Removing the MCU and EMP, page 2-16
• How to Perform the Initial MCU Configuration, page 2-17
• How to Perform the Initial EMP Configuration, page 2-23
• Accessing the MCU Administrator Interface, page 2-28
• Using the MCU Setup Wizard, page 2-29
• Registering the Online Help for the 3545 MCU, page 2-30
Physical Description
The Cisco Unified Videoconferencing 3545 MCU works together with a Cisco Unified
Videoconferencing 3545 EMP Enhanced Media Processor (EMP) module to perform audio and
videoconferencing. The Cisco Unified Videoconferencing 3545 MCU is responsible for signaling and
audio. The EMP is responsible for video. The Cisco Unified Videoconferencing 3545 MCU and EMP
modules connect via the Ethernet.
Each Cisco Unified Videoconferencing 3545 MCU can be registered to up to three EMP modules on the
same chassis.
For correct operation, the EMP card must register with the MCU.
Related Topics
• Physical Description of the Cisco Unified Videoconferencing 3545 MCU Module, page 2-12
• Physical Description of the Cisco Unified Videoconferencing 3545 EMP Module, page 2-12