Customer responsibilities, General recommendations, Maintenance – Craftsman 580.761800 User Manual

Page 10: Product specifications

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MAINTENANCE

CUSTOMER RESPONSIBILITIES

MAINTENANCE SCHEDULE

RLL IN DATES AS YOU COMPLETE

HOURLY OPERATING INTERVAL

SERVICE DATES

REGULAR SERVICE

MAINTENANCE TASK

Before Each

Use

Every 25
Hours or

Yearly

Every

too

Hours or

Yearly

PRESSURE WASHER

Check/clean water inlet screen

on quick-connect.

xt

Check high pressure hose.

X

Check detergent hose.

X

Check spray gun and assembly for leaks.

X

Purge pump of air and contaminants.

X

ENGINE
Check oil level.

X

Change engine oil.

X*

Service air cleaner.

X"

Clean/replace spark plug.

X

Prepare for storage.

Prepare unit for storage if it is to
remain idle for longer than 30 days.

t Clean if clogged. Replace if perforated or tom.

* Change sooner when operating under heavy load or high ambient temperature.

" Clean more often under dirty or dusty conditions.

GENERAL RECOMMENDATIONS

The warranty of the high pressure washer does not cover

items that have been subjected to operator abuse or neg­
ligence. To receive full value from the warranty, operator
must maintain high pressure washer as instructed in this

manual.

Some adjustments will need to be made periodically to
properly maintain your high pressure washer.

All adjustments in the Service and Adjustments section of

this manual should be made at least once each season.

• Once a year you should clean or replace the spark

plug and clean or replace the air filter and check the

gun and wand assembly for wear. A new spark plug

and clean air filter assure proper fuel-air mixture and

help your engine run better and last longer.

PRODUCT SPECIFICATIONS

Pressure Washer Specifications

Engine Specifications

PRESSURE

1800 DSi

FLOW RATE

2GPM

DETERGENT MIX

Use undiluted deteraent

WATER SUPPLY

TEMPERATURE

Not to Exceed 140°F

ENGINE MODEL

Briaas & Stratton

RATED HORSEPOWER

4.5

DISPLACEMENT

190CC

SPARK PLUG: Type:

Set Gap to:

Champion J-19LM

or equivalent

0.030 inch (0.76mm)

GASOLINE CAPACITY

1.6

U.S. Quart

OIL

SAE 30 weight

SOLID STATE IGNITION
AIR GAP

0.0125 inch

In the State of California a spark arrestor is required by

law (Section 4442 of the California Public Resources
Code). Other states may have similar laws. Federal laws
apply on federal lands.

Note: If you equip the engine of your pressure washer

with a spark arrestor muffler, the spark arrestor must be

maintained in effective working order by the owner/opera-
tor.

You can order a spark arrestor through your Sears

Service Center.

10

Advertising