Ring maintenance – Craftsman 580.761800 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
0-RING MAINTENANCE
Through the normal operation of your pressure washer,
0-Rings, which keep the connections of the hoses and
gun tight and leak-free may become worn or damaged.
Provided with your pressure washer is an 0-Ring
Maintenance Kit which provides replacement 0-Rings,
Rubber Washer and Quick Connect filter.
Parts in the 0-Ring Kit Include:
• 1 0-Ring (p/£97837) for the end of the spray gun
connection between gun and high/low spray wand.
1 O-Ring (p/n B2386) for the outside of the Male
Quick-Connect.
2 0-Rings (p/n B2264) for the ends of the high pres
sure hose.
1 Water Inlet Screen (p/n B2384) for the Female
Quick-Connect.
To remove a worn or damaged O-Ring:
• Use a small flathead screwdriver to get underneath
the O-Ring and pry it off.
Note: The above two 0-Rings are close in size. Please
match carefully to assure proper O-Ring usage.
• 1 Rubber Washer (p/n B2385) for the inside of the
Male Quick-Connect.
13