Craftsman 315.115340 - Manual (Page 13)

OPERATION
ADJUSTABLE TORQUE CLUTCH
The drill Is equipped with an adjustable torque clutch for
driving different types of screws into different materials.
The proper setting depends on the type of material and
the size of screw you are using.
ADJUSTING TORQUE
See Идите 6.
■ There are twenty-four torque indicator settings located
on the front of the drill.
■ Rotate the adjusting ring to the desired setting.
• 1 - 4 . For driving smaii screws
• 5-8 For driving screws into soft
material
• 9 - 1 2 For driving screws into soft and hard
materials
• 1 3 - 1 6 For driving screws into hard wood
• 1 7 - 2 3 For driving large screws
• 411 For heavy drilling
TO DECREASE
TORQUE
ADJUSTING
RING
TO INCREASE
TORQUE -N
Fig. 6
LEDWORKLIGHT
See Rguie 7.
The LED worWight on the foot of the drill will come on
when the switch trigger is depressed. This provides addi­
tional lighting on the si^acs of the workpiece for opera­
tion in lower-light areas.
Fig. 7
Brr STORAGE
Sea Hgura 8.
When not in use, bits provided with the drill can be placed
in the storage area located on the base of the drill.
13