Maintenance, Customer responsibilities, Before each use – Craftsman 486.24516 User Manual

Page 22: Lubrication, Engine maintenance, Cleaning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MAINTENANCE

CUSTOMER RESPONSIBILITIES

• Read and follow the maintenance schedule and the maintenance procedures listed in this section.

MAINTENANCE SCHEDULE

Fill in dates as you

complete regular service. Service Dates

Check for loose fasteners

X

Check soft vinyl boot

X

Check tire pressure

X

Check engine oil level

X

Lubricate

X

Clean

X

X

Maintain engine per instructions below and in engine manual.

BEFORE EACH USE

CHECK FOR LOOSE FASTENERS

Make a thorough visual check of the Chipper Vac for
any bolts and nuts which may have loosened.

Retiphten any loose bolts and nuts. •

CHECK VINYL BOOT

Check the vinyl boot {on front of hardtop) for wear.
Replace if worn or damaged.

CHECK TIRE PRESSURE

Check tire pressure regularly. Recommended tire
pressure is 12-14 Lbs.

CHECK ENGINE OIL LEVEL

Check oil level before each use. Maintain engine oil

as instructed in the separate engine manual.

LUBRICATION

At the beginning of each season, lubricate the latch,

latch pivot bolt, and the axle where the hitch tongue

pivots, with a iight machine oi).

At least once a season, grease or oil the wheel

bearings. Use automotive wheel bearing type grease

or 20 weight oil.

A

WARNING:

Always stop engine and

disconnect spark plug wire before clean­

ing, lubricating or before performing any
repairs or maintenance.

ENGINE MAINTENANCE

Check

oil level

before each use. Maintain engine oil

as instructed in the separate engine manual.

Service

air cleaner

every 25 hours under normal

conditions. Clean every few hours under extremely

dusty conditions. Poor engine performance and
flooding usually indicates that the air cleaner should
be serviced. To service the air cleaner, refer to the
separate engine manual.

The

spark plug

should be cleaned and the gap reset

once a season. Spark plug replacement at the start
of each seasort.is recommended. Check the engine

manual for correct plug type and gap specifications.

CLEANING

Make sure the cart, the sides and front panel and top

are cleaned after each use. Grass clippings and

leaves left in the cart will mildew and cause damage
if not cleaned out.

Clean the engine

regularly with a cloth or brush.

Keep the cooling fins on the engine housing clean to

permit proper air circulation which is essential to
engine performance and life. Be sure to remove all
dirt and debris from muffler area.

22

Advertising