E) attachment clutch switch, P) servicereminder/hourmeter – Craftsman 917.28991 User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of

various controls and adjustments. Save this manual for future reference.

Our tractors conform to the applicable safety standards of the

American National Standards Institute.

(A) ATTACHMENT LIFT LEVER - Used to
raise and lower the mower or other attach­
ments mounted to your tractor.

(B) BRAKE PEDAL - Used for braking the

tractor and starting the engine.

(C) PARKING BRAKE - Locks clutch/brake
pedal into the brake position.

(D) THROTTLE CONTROL - Used to con­

trol engine speed.

(E) ATTACHMENT CLUTCH SWITCH

- Used to engage the mower blades, or other
attachments mounted to your tractor.

(F) IGNITION SWITCH - Used for starting

and stopping the engine.

(G)

REVERSE OPERATION SYSTEM

(ROS) "ON " POSITION - Allows operation

of mower or other powered attachment while

in reverse.

(H) LIGHT SWITCH - Turns the headlights

on and off.

(J) CRUISE CONTROL LEVER - Used to

set forward movement of tractor at desired
speed without holding the forward drive

pedal.

(K) FORWARD DRIVE PEDAL - Used for

forward movement of tractor.

(L) REVERSE DRIVE PEDAL- Used for
reverse movement of tractor.

(M)

FREEWHEELCONTROL-Disengages

transmission for pushing or slowly towing
the tractor with the engine off.

(N) CHOKE CONTROL - Used when start­
ing a cold engine.

(P) SERVICEREMINDER/HOURMETER

- Indicates when service is required for the
engine and mower.

14

Advertising