Assembly, Remove the edger from the carton – Craftsman 536.772301 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
ASSEMBLY
Parts Packed Separately In Carton
1
- Owner’s Manual (not shown)
1
- Container Of Oil
1
- Hair Pin
Pi
' Container of Oil
1 - Hair Pin
A
WARNING: Always wear safety
glasses or eye shields while as
sembling the Edger.
Figure 1 shows the Edger completely as
sembled.
References to the right or left side of the
Edger are from the viewpoint of the opera
tor's position behind the unit.
REMOVE THE EDGER FROM THE
CARTON
1. Remove the bottle of oil and parts bag
from the carton.
2. Cut down all four corners of the carton.
3. Remove the packing material positioned
around the unit.
4. Roll the Edger out of the carton and
place on a hard level surface.