Cleaning, Customer responsibilities – Craftsman 917.258692 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

CUSTOMER RESPONSIBILITIES

CLEAN AIR SCREEN (See Fig. 18)

Air screen must be kept free of dirl and chaff lo_ prevent
engine damage (rorn overheating Clean with a wire brush

or compressed air to remove dirt and stubborn dried gum

fibers.

ENGINE COOLING FINS (See Fig. 18)

Remove any dust, dirt or oil from engine cooilng lins to

prevent engine damage from overheating. Engine blower

housing must be removed. Remove side panels and hood
{See *TO REMOVE HOOD AND GRiLL ASSEMBLY"in the
Service and Adjustments section of this manual)

F)G..ia

ENGINE OIL FILTER

Replace the engine oil iiiter every season or every other oil

change II the tractor is used more than 100 hours in one
year,

MUFFLER

inspect and replace corroded muffler and spark arrester (if

equipped) as It could create a lire hazard and/or damage

IN-LINE FUEL FILTER (See Fig. 19)

The fuei filter should be replaced once each season. If fuel

filter becomes ologgad, obstructing fuel flow to carburetor,

replacemetit Is required.

\¥iih engine coo!, remove filter artd plug fuel line

sactlona

Place new fuei filter In position In fuel fine with arrow

pointing towards carburetor.

Ba sura thera are no fuel line leaks and clamps are
properly positioned.

FiG. 19

CLEANING

Clean engine, battery, seat, finish, etc of all foreign

matier

Keep finished surfaces and wheels free of all gasoline,
oil, stcl

Protect painted surfaces with aulomotfve type wax.

We do not recommend using a garden hose to clean your

tractor uniess the eiectrical system, muffler, air filter and

carburetor are covered to keep water out. Water In engine
cart result 1n a shortened artgine life.

SPARK PLUGS

Replace spark plugs al the beginning of each mowing
season or after every 100 hours of operation, whichever
occurs first Spark plug type and gap setting are shown In
"PRODUCT SPECIFICATIONS" on page 3 of this manual

20

Advertising