Craftsman 917.270711 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SERVICE AND ADJUSTMENTS

^CAUTION: Before performing any sen/ice or adjustments:

• Depress clutch/brake pedal fully and set parking brake.
• Place gearshift lever in neutral (N) position.

• Place attachment clutch in “DISENGAGED” position.
• Turn ignition key “OFP and remove key.
• Make sure the blades and all moving parts have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come

in contact with plug.

TO REMOVE MOWER

Mo>^r will be easier to remove from the

righl side of tractor.

• Place attachment clutch in “DISEN­

GAGED” position.

• Move áttachment lift lever fonvard to

. lower mower to its lowest position.

• Roll Beli^ éh^tié pulley.

• Disconnect clutch rod from clutch lever

by removing retainer spring.

• Disconnect anti-swaybar from chassis

bracket by removing retainer spring.

• Disconnect suspension arms from rear

deck brackets by removing retainer
springs. _

• Disconnect front links from deck by

removing retainer springs.

• Raise lift lever to raise suspension

arms. Slide mower out from under trac­

tor.

IMPORTANT: If an attachment other than

the mower deck is to be mounted on the
tractor, remove the front links.

TO INSTALL MOWER
• Raise attachment lift lever to its highest

position.

• Slide mower under tractor with dis­

charge guard to right side of tractor.

• Lower lift lever to its lowest position.
• Install mower in reverse order of

removal instructions.

Clutch Lever-

Clutch Rod

Retainer

Spring

Suspension

Arms

Engine Pulley

Front

Link

Retainer

Spring

Retainer Springs
(Both Sides)

Retainer Springs
(Both Sides)

Anti-Swaybar

22

Advertising