Assemble tractor lift – Craftsman 610.24610 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
•
Lift tubes come pre-assembled. Attach lift tube assemblies ( 4 ) to angle frame (1 ) using bolts ( 22 ), flat washers ( 24 ), split lock
washers ( 23 ) and hex nuts ( 25 ).
•
Secure rear of lift tube assembly (4 ) to angle frame (1 ) using bolts ( 29 ), flat washers ( 24 ), split lock washers ( 23 ) and hex
nuts ( 2 5 ) .
Note: Over-tightening receiver bolts ( 22 ) could cause damage to lift tubes (4 ).
Assemble Tractor Lift
Attach Lift Tubes to Angle Frame
Front of Craftsman Zero Turn
Determining the width between lift tubes.
Craftsman Tracton
/Brush guard / Bumper
Note: The higher the lift tube extensions (5)
are positioned, the harder the tractor will be to lift.
k
O
O
o
ftZJi
dD
Settings:
A.
Push Mower
B.
Brush guard / Bumper
C.
Craftsman Tractor
D.
Front of Craftsman Zero Turn
FOR MISSING PARTS, Call 1-800-652-2321, Monday - Friday, 8 a.m. - 5 p.m. E.S.T.
Page 6.