Canon iR 2018 - Manual (Page 12)

21
Facsimile Functions
22
Fa
cs
im
ile
Fu
nc
tio
ns
Co
py
in
g
Fu
nc
tio
ns
O
th
er
U
se
fu
l
Fe
at
ur
es
Pr
ef
ac
e
What You Can Do with This Machine (FAX Features)
What You Can Do with This Machine
(FAX Features)
Hook
R Direct TX Stamp
Coded Dial
Delayed TX
Redial/Pause Address Book
OK
1 2 3
4 55 6
7 8 9
0 #
ID C
Fax Features Keys
To Specify the Time to Start Sending Facsimile Guide Chapter 3
Use the delayed transmission to store a document in
memory and then to have it sent at a preset time, for
example, when telephone rates are lower. You can set up
to 70 documents for delayed sending.
Dialing Through a Switchboard Facsimile Guide Chapter 7
A PBX (Private Branch Exchange) is an on-site telephone
switchboard. If your machine is connected through a PBX
or other telephone switching system, you have to dial the
outside line access number first, then the number of the
party you are calling.
To facilitate this procedure, you can register the PBX
access type and the outside line access number under [R]
so that you only need to press this key before dialing the
fax/telephone number you require.
To Scan Two-Sided Originals Facsimile Guide Chapter 3
You can set the machine to automatically turn over two-
sided originals that are placed in the feeder, so as to scan
each side separately.
* This mode is available only if the optional feeder (DADF-P2) is
attached.
Facsimile Guide Chapter 3 To Send Faxes Clearly
You can specify the resolution before scanning the
original. The following settings are available for adjusting
the resolution: Standard, Fine, Photo, Super Fine, Ultra
Fine.
You can set the scan density before scanning the original.
Density refers to the degree of difference between the
light and dark areas of an image.
[Delayed TX]
[R]
[2-Sided]
[Image Quality]
[Density]
Delayed TX
R