Craftsman 358.794772 - Manual (Page 5)

blower tubes. When using the op­
tional vacuum kit, always install vac­
uum tubes and vacuum bag assem­
bly. Make sure vacuum bag assem­
bly is completely zipped,
• Check air intake opening, blower
lubes, and vacuum tubes frequently,
always with engine stopped and
spark plug disconnected. Keep vents
and discharge tubes free of debris
which can accumulate and restrict
proper air flow.
• Never place any object in air intake
opening as this could restrict proper air
flow and cause damage to the unit.
• Never use for spreading chemicals,
fertilizers, or other substances which
may contain toxic materials.
• To avoid spreading fire, do not use
near leaf or brush fires, fireplaces,
barbecue pits, ashtrays, etc.
• Use only for jobs explained in this
manual,
MAINTAIN YOUR UNIT PROPERLY
^WARNING: Disconnect spark
piug before performing maintenance
except for carburetor adjustments.
• Have all maintenance other than the
recommended procedures described
in the operator’s manuai performed
by a Sears Service Center.
• Use only recommended Craftsman
replacement parts; use of any other
parts may void your warranty and
cause damage to your unit.
• Empty fuel tank before storing the
unit. Use up fuel left in carburetor by
starting engine and ietting it run until
it stops.
• Do not use any accessory or attach­
ment other than those recommended
by manufacturer for use with your unit,
• Do not store the unit or fuel in a closed
area where fuel vapors can reach____
sparks or an open flame from hot
water heaters, electric motors or
switches, furnaces, etc,
• Store in a dry area out of reach of
children.
SAFETY NOTICE: Exposure to vibra­
tions through prolonged use of gaso­
line powered hand tools could cause
blood vessel or nerve damage in the
fingers, hands, and joints of people
prone to circulation disorders or abnor­
mal swelling. Prolonged use in cold
weather has been linked to blood ves­
sel damage in otherwise healthy
people, if symptoms occur such as
numbness, pain, loss of strength,
change in skin color or texture, or loss
of feeling in the fingers, hands, or
joints, discontinue the use of this tool
and seek medical attention. An
anti vibration system does not guaran­
tee the avoidance of these problems.
Users who operate power tools on a
continual and regular basis must moni­
tor closely their physicai condition and
the condition of this tool.
SPECIAL NOTICE; This unit is
equipped with a temperature limiting
muffler and spark arresting screen
which meets the requirements of Cali­
fornia Codes 4442 and 4443. All U.S.
forest land and the states of California,
Idaho, Maine, Minnesota, New Jersey,
Oregon, and Washington require by
law that many internal combustion en­
gines be equipped with a spark arrest­
ing screen. If you operate in a locale
where such regulations exist, you are
legally responsible for maintaining the
operating condition of these parts. Fail­
ure to do so is a violation of the law.
Refer to the MAINTENANCE section for
information on maintenance of the
muffler and spark arresting screen.
ASSEMBLY
CARTON CONTENTS
Check carton contents against the fol­
lowing list.
Model 358.794772
• Blower
• Upper blower tube
• Lower blower tube
• High velocity nozzle
• Elbow tube
• Vacuum bag
• Upper vacuum tube
• Lower vacuum tube
• 2-Cycle engine oil
NOTE: It is normal for the fuel filter to
rattle in the empty fuel lank.
ASSEMBLY
^WARNING: Stop engine and be
sure the impeller blades have stopped
turning before opening the vacuum in­
let door or attempting to insert or re­
move the vacuum tubes. The rotating
blades can cause serious injury.