Storage, Chipper-shredder, Engine – Craftsman 247.799892 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

A

WARNING:

PERIODICALLY

CLEAN

MUF­

FLER

AREA

TO

REMOVE

ALL

GRASS,

DIRT AND COMBUSTIBLE DEBRIS.

CLEANING

• The chipper-shredder may be cleaned by running

water from a hose through the hopper assembly
and chipper chute with the engine running. Allow
the chipper-shredder to dry thoroughly.

• Wash the bag periodically with water. Allow to dry

thoroughly in the shade. Do not use heat.

Clean Out

Chaff and Dirt

FIGURE 11.

SPARK PLUG

The spark plug should be cleaned and the gap reset
to .030" at least once a season or every 50 hours of
operation. See figure 12. Spark plug replacement is

recommended at the start of each season. Refer to
engine parts list for correct spark plug type.

NOTE:

Do not sandblast spark plug. Spark plug

should be cleaned by scraping or wire brushing and
washing with a commercial solvent.

MUFFLER

Do not operate the chipper-shredder without a muffler

or tamper with the exhaust system. Damaged mufflers
or spark arresters could create a fire hazard. Inspect

periodically, and replace if necessary. If your engine
is equipped with a spark arrester screen assembly,
remove every 50 hours for cleaning and inspection.

Replace if damaged.

STORAGE

Prepare your chipper-shredder for storage at the end

of the season or if the unit will not be used for 30 days
or more.

A

WARNING:

NEVER

STORE

MACHINE

WITH

FUEL

IN

THE

FUEL

TANK

INSIDE

OF

BUILDING

WHERE

FUMES

MAY

REACH AN OPEN FLAME OR SPARK, OR

WHERE

IGNITION

SOURCES

ARE

PRESENT

SUCH

AS

HOT

WATER

AND

SPACE

HEATERS,

FURNACES,

CLOTHES

DRYERS,

STOVES,

ELECTRIC

MOTORS,

ETC.

NOTE:

A yearly check-up by your local Sears Service

Center is a good way to make certain your chipper­
shredder will provide maximum performance for the
next season.

CHIPPER-SHREDDER

• Clean the chipper-shredder thoroughly.

• Wipe unit with an oiled rag to prevent rust (use a

light oil or silicone).

ENGINE

IMPORTANT:

IT IS IMPORTANT TO PREVENT

GUM DEPOSITS FROM FORMING IN ESSENTIAL

FUEL SYSTEM PARTS SUCH AS CARBURETOR,
FUEL FILTER, FUEL HOSE, OR TANK DURING
STORAGE. ALSO, EXPERIENCE INDICATES THAT
ALCOHOL BLENDED FUELS (CALLED GASOHOL
OR USING ETHANOL OR METHANOL) CAN
ATTRACT MOISTURE WHICH LEADS TO SEPARA­
TION AND FORMATION OF ACIDS DURING STOR­
AGE. ACIDIC GAS CAN DAMAGE THE FUEL SYS­
TEM OF AN ENGINE WHILE IN STORAGE.

• Drain the fuel tank.
• Start the engine and let it run until the fuel lines and

carburetor are empty.

• Never use engine or carburetor cleaner products in

the fuel tank or permanent damage may occur.

• Use fresh fuel next season.

11

Advertising
This manual is related to the following products: