How to convert unit from, Vacuum use to blower use, Vacuum bag shoulder strap – Craftsman 358.794740 User Manual
Page 8: Adjustment, Shoulder strap attachment
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HOW TO CONVERT UNIT FROM
VACUUM USE TO BLOWER USE
1. Remove the elbow tube and vacu
um bag by turning the knob coun
terclockwise to loosen the elbow
tube.
2. Remove the vacuum tubes by turn
ing the tubes clockwise.
3. Close the vacuum inlet cover and
make sure it is latched closed.
4. Reinstall the blower tubes (see
BLOWER TUBE ASSEMBLY).
VACUUM BAG SHOULDER STRAP
ADJUSTMENT
1. Hold the unit as shown with the muf
fler side facing away from your body
and clothes.
2. Pass the shoulder strap over your
head and onto your right shoulder.
3. Extend your left arm toward the
rear of the vacuum bag.
4. Adjust shoulder strap until the
vacuum bag/shoulder strap seam
lies between your thumb and index
finger.
5. Make sure air flows freely from the
elbow tube into bag. If bag is
kinked, the unit will not operate
properly.
SHOULDER STRAP ATTACHMENT
(optional accessory #71-85783)
1. Pass the shoulder strap over your
head and onto your left shoulder.
2. Snap the hook onto the retainer
(see following illustration).