Answering intercom calls 17, Intercom calls, 17, Night trans ferred calls, 17 – Vertical Communications and FXT User Manual

Page 25: Answering intercom calls, When you hear intercom ringing (two short bursts)

Advertising
background image

Answering Intercom Calls

An intercom call is one that is made from one system telephone to another. Your

station receives intercom calls in one of two ways depending upon system

programming. In a voice-first setting, a short tone is followed by the caller’s

voice heard on the speaker. With a tone-first setting, the telephone rings in a

distinctive pattern and the user of the receiving station must take action to

answer.
As with an outside call, your LCD screen displays the line number of the

incoming call (e.g., L123) and any caller ID information that the ringing line is

programmed to receive.

When you hear an intercom tone followed by a caller’s
voice,

1. SPEAK toward the telephone to answer, OR LIFT handset if

privacy is desired.

When you hear intercom ringing (two
short bursts),

1. PRESS INTERCOM OR SELECT Answer.
2. SPEAK toward telephone OR LIFT handset

if privacy is desired.

3. SELECT Do Not Disturb if you do not wish

to answer the call at this time.

NOTE:

For more information on setting Do Not Disturb at your station, see

section titled Do Not Disturb Condition on page 69.

Large Screen Display Speakerphone Station User’s Guide

17

GCA70-349

Answering Calls

Wednesday 19

11:36am

Do Not Disturb
Answer

Messages

J Doe Calling

Divert

Voice Messaging

Intercom Call From J Doe

Advertising
This manual is related to the following products: