Loose parts in carton, Removing the unit from the carton, Assembling the handle – Craftsman 247.370160 User Manual
Page 10: Assembly
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ASSEMBLY
NOTE: Stand behind the mower as it you were going to operate it. Your
right hand corresponds to the right side of the mower; your left hand
corresponds to the left side of the mower.
LOOSE PARTS IN CARTON
The following items are packaged loose in the carton:
Operator’s Manual, Grass Catcher
REMOVING THE UNIT FROM THE CARTON
1.
Cut the corners of the carton and lay the sides flat on the ground.
Remove all packing inserts.
2.
Move the mower and grass catcher out of the carton.
3.
Make certain the carton has been completely emptied before
discarding it.
ASSEMBLING THE HANDLE
NOTE: Remove any packing material which may be between upper
and lower handles.
1.
Loosen each hand knob found on the inside of the upper handle.
2.
Gently lift and pivot the upper handle into the operating position
as shown in Figure 1. Make certain the lower handle is seated
3. Tighten star knobs securing lower handle to handle brackets. See
Figure 2. Make certain the lower handle is seated securely into
the handle mounting brackets.
10