Craftsman CR2000 - Manual (Page 5)

SYMBOLS
The following signal words and meanings are intended to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
A
DANGER:
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
A
WARNING:
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
A
CAUTION:
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
CAUTION:
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
A
Safety Alert Indicates a potential personal injury hazard.
0
Read Operator’s
Manual To reduce the risk of injury, user must read and understand opera­
tor’s manual before using this product.
O
Eye Protection
Always wear eye protection with side shields marked to comply
with ANSI Z87,1,
Wet Conditions Alert Do not expose to rain or use in damp locations.
Ao'"î5m\
AJ-i\
Keep Bystanders
Away
Keep all bystanders at least 50 ft, away.
/é\ Ricochet
Thrown objects can ricochet and result in personal injury or prop­
erty damage.
No Blade
Do not install or use any type of blade on a product displaying this
symbol.
{jÆniXêkjj Recycle Symbols
This product uses nickel-cadmium (Ni-Cd) and lithium-ion (Li-ion)
batteries. Local, state, or federal laws may prohibit disposal of
batteries in ordinary trash. Consult your local waste authority for
information regarding available recycling and/or disposal options.
= Direct Current Type or a characteristic of current
no No Load Speed Rotational speed, at no load
,,,/min Per Minute Revolutions, strokes, surface speed, orbits etc,, per minute
V Volts Voltage
Hz Hertz Frequency (cycles per second)
min Minutes Time
5 - English