External synchro-flash shooting (page 62) – Nikon E2N supplement User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Setting the six basic modes simuitaneously (Page 4S)
-Command lock is cancelled. (See page 46.)
-Command lock (see page 46) and preview mode (see page 8 on this manual) are
canceled.
External synchro-flash shooting (Page 62)
3
Depress the shutter release button.
The "Sy” mark blinks in the LCD panel to
indicate that the camera is in standby mode;
pictures are taken in sync with the firing of the
remote speedlight
—The standby mode will be canceled approx.
10 seconds after depressing the shutter
release button if the firing of the remote
speedlight is not detected by the camera.
3
Depress the shutter release button.
The “Sy" mark blinks in the LCD panel to
indicate that the camera is in standby mode;
pictures are taken in sync with the firing of the
remote speedlight.
—The standby mode will be canceled approx.
2 minutes after depressing the shutter
release button if the firing of the remote
speedlight is not detected by the camera.
—To cancei the standby mode, rotate the
Main dial to L and turn the power OFF. Note
that the mirror remains in the up position
throughout Set the Main dial to L and turn
the power ON again to bring the mirror back
down.