29 turn on the flash unit, Wait for the ready- light® to light, Turn power switch to “on – Nikon os Speedlight SB-102 User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

B-5. Select an f/stop with the

exposure calculation dial.

Select an aperture by using the

non-TTL auto shooting aperture

scale # and non-TTL auto shooting
aperture index

For example, when the shooting

situation

mark

(^:

underwater

photography) is set toASA/ISO 100,

the non-TTL auto shooting aperture

index is opposite the f/8 on the

green scale and the f/4 on the pink
one. These then are the useable

f/stops. At f/8, the useable flash-
to-subject distance range is from
0,6m (2ft) to 2m (6.6ft), At f/4, the

useable flash-to-subject distance

range is from 0.6 m (2ft) to 4 m (13ft).

The

closest

shooting

distance

for

non-TTL

automatic

operation

is

0.6m

(2ft)

regardless

of the film speed and whether or not the

wide-flash adapter Is being used.

B-6. Set the selector dial on

the Sensor Unit SU-101.

Set the index on the selector dial to
either the pink circle O or the green

squareO to correspond to the color
of the aperture selected in Step

B-5. For example, if you selected
f/4 in Step B-5, set the index to the
pink circle. If you chose f/8, set the
index to the green square.

B-7. Set the f/stop on the lens.
In the photograph, f/8 is set.

TEST*^

GI»*- ^//'

29 Turn on the flash unit.

‘ Turn power switch to “ON."

•As soon as you turn on the SB-102 when

using the Nikonos-V, the shutter speed LED

indicator

inside

the

viewfinder

will

blink

if

the

shutter

speed/mode

selector

dial

is

set

at "A," or at any shutter speed from 1/1000

to

1/30sec.

As

soon

as

you

turn

on

the

SB-102

when

using

the

Nikonos

IV-A,

the

viewfinder LED turns off.

• For normal shooting, the T-S switch should

be

in

the

"OFF"

position.

For

information

about the T-S switch, see pages 29 to 30.

Wait for the ready-
light® to light.

As soon as the flash ready-light

lights, the SB-102 is ready to fire.
Except for the Nikonos III, if the

camera you are using has a view­

finder ready-light, it will light when
the SB-102 is completely recycled.

Note that with the Nikonos-V and
Nikonos IV-A, the exposure meter

must be turned on to activate the

viewfinder ready-light.

15

Advertising