Ready-light warnings, Before shooting, After shot – Nikon N4004s User Manual
Page 60
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
READY-LIGHT WARNINGS
When using the built-in TTL flash or accessory Nikon speedlights,
the ready-light LED in the viewfinder of the N4004s lights up
when the flash is recycled. The following ready-light indications
are used for warnings:
Before shooting
}
disappears
Recharging (with built-in flash, shutter locks:
does not lock with external speedlight)
/ blinks
Beyond acceptable film speed range for TTL
photography (over ISO 400)
SB-19's camera selector is set to B or B
(EM)*
i
lights up
External speedlight not set to TTL*
After shot
*For details, see page 59.
i
blinks
(approx. 3 sec.)
Light may be insufficient for correct
exposure; confirm shooting distance range