Loading the battery – Canon EOS 600 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
LOADING THE BATTERY
This camera uses one, six-volt lithium battery pack 2CR5.
1) Remove the grip with a coin or
similar object.
•
When replacing the battery,
first push the orange lever up.
•
When using a tripod, dis
mount the camera before re
placing the battery.
2) As shown in the photo, load
the battery so that its termi
nals face in the direction of
the camera. Make sure the
battery is pushed in ail the
way until it is locked by the
orange lever,
3) Replace the grip securely.
Advertising